FLUKE Precision Multifunction Calibrator 726

SKU: M-CLB-038 Category: Tag:
Brands:FLUKE

The FLUKE 726 Precision Multifunction Calibrator is a precise and powerful, yet easy-to-use field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves and test and calibrate transmitters. FLUKE 726 interprets results without the help of a calculator and stores measurement data for later analysis.

76,987.00 EGP (exc. tax)

Availability: Only 1 left in stock

Only 1 left in stock

The FLUKE 726 Precision Multifunction Calibrator is a precise and powerful, yet easy-to-use field calibrator.

It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves and test and calibrate transmitters. FLUKE 726 interprets results without the help of a calculator and stores measurement data for later analysis.

Key features:

  • Precision multifunction process calibrator designed specifically for the process industry.
  • Delivers precise measurement and calibration source performance with accuracies of 0.01%.
  • Stores up to eight calibration results in memory for later analysis,
  • Offers HART mode that inserts a 250-ohm resistor in mA measure and source for compatibility with HART instrumentation.

Specifications:

Measurement Accuracy

Voltage DC 30.000 V 0.01% + 2 mV (upper display)
20.000 V 0.01% + 2 mV (lower display)
90.00 mV 0.01% + 10 μV
-10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector)
Current DC 24.000 mA 0.01%+ 2 mA
Resistance 0.0 to 4000.0 Ω ± 0.015%
Frequency 2.0 to 1000.0 CPM 0.05% + 0.1 cpm
1.0 to 1000.0 Hz 0.05% + 0.1 Hz
1.00 to 15.00 kHz 0.05% + 0.01 kHz
Sensitivity 1 V peak-to-peak-minimum
Pressure Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure.

Source Accuracy

Voltage DC 100.00 mV 0.01% + 10 μV
20.000 V 0.01% + 2 mV
-10.00 mV to 75.00 mV 0.025% + 1 count (via TC connector)
Current DC 24.000 mA (Source) 0.01% + 2 μA
24.000 mA (Simulate) 0.01% + 2 μA
Resistance Range, accuracy (percent of reading + floor) and excitation current 5 to 400 Ω, 0.015% + 0.1 Ω, 0.1 to 0.5 mA
5 to 400 Ω, 0.015% + 0.05 Ω, 0.5 to 3 mA
400 to 1500 Ω, 0.015% + 0.5 Ω, 0.05 to 0.8 mA
1500 to 4000 Ω, 0.015% + 0.5 Ω, 0.05 to 0.4 mA
Frequency 2.0 to 1000.0 CPM 0.05%
1.0 to 1000.0 Hz 0.05%
1.0 to 10.0 kHz 0.25%
10.0 to 15.0 kHz 0.5%
Waveform 5 V p-p squarewave, -0.1 V offset

RTDs and Thermocouples

Measure and source accuracy Cu10 1.8°C
NI-120 0.15°C
PT-100 (385) 0.45°C
PT-100 (392) 0.35°C
PT-100 (391-JIS) 0.35°C
PT-200 (385) 0.95°C
PT-500 (385) 0.55°C
PT-1000 (385) 0.35°C
RTD Resolution 0.01°C (0.01°F)
Cu10.01 C 0.1°C (0.1°F)
J 0.4°C
K 0.5°C
T 0.4°C
E 0.4°C
R 1.4°C
S 1.4°C
B 1.4°C
L 0.45°C
U 0.45°C
N 0.6°C
XK 0.4°C
BP 1.1°C
TC Resolution J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F

Specifications

Ramp functions Source functions Voltage, current, resistance, frequency, temperature
Ramps Slow ramp, Fast ramp, 25% step-ramp
Loop power function Voltage 24 V
Accuracy 10%
Maximum current 22 mA, short circuit protected
Step functions Source functions Voltage, current, resistance, frequency, temperature
Steps 25% of range, 100% of range

Environmental Specifications

Operating temperature -10°C to +55°C
Storage temperature -20°C to +71°C
Operating altitude 3000 m
Safety Specifications
Agency approvals EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992

Mechanical and General Specifications

Size 200 x 96 x 47 mm (7.9 x 3.8 x 1.9 in)
Weight 650 g (23 oz)
Batteries 4 AA alkaline batteries
Battery replacement The separate battery compartment, accessible without breaking the calibration seal
Side port connections Pressure module connector, also used for remote real-time programming

To Download FLUKE 726 Precision Multifunction Calibrator Datasheet.

Brand

FLUKE

Weight 1000 g

Reviews

There are no reviews yet.

Be the first to review “FLUKE Precision Multifunction Calibrator 726”

Your email address will not be published. Required fields are marked *