Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA

SKU: M-PCE-002 Category:

Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA is required as part of a control measurement or for quickly determining the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple.

Availability: Available on backorder

Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA is required as part of a control measurement or for quickly determining the flow in a pipeline and is therefore a portable / easy-to-install measuring system. The ultrasonic flow meter works according to the transit time difference method. The measuring principle of the ultrasonic flow meter is quite simple.

Measuring a pipe obliquely with the flow takes less time than measuring against the flow. The stronger the current, the longer it takes to fight it and the faster you go with it. The difference between the flow times with the flow or against it therefore depends directly on the flow velocity of the river. The ultrasonic flow meter uses this effect to determine flow velocity and flow rate.

Electro-acoustic transducers (“piëzo effect”) send and receive short ultrasonic pulses through the medium flowing in the pipe. The transducers are offset in the longitudinal direction on both sides of the measuring tube. The non-destructive sensors are placed on the pipe and e.g. attached with a cable tie. The display shows the flow velocity within a short time. The ultrasonic flow meter can be used to measure on metallic pipes, plastic pipes or rubber pipes.

 

Specifications:

Ultrasonic Flow Meter PCE-TDS 100HSH
Handheld measuring range -32 … +32 m/s
Resolution 0.0001 m/s, 0.00033 ft/s
Accuracy for DN ≥ 50 mm:
for DN < 50 mm:
±1.5 % of measured value
±3.5 % of measured value
Reproducibility ±1.0 % of measured value
Media All liquids with an impurity <5% and a flow >0.03 m³/h

 

Flow units Cubic meter [m³]
Liter [l]
Gallon (USA) [gal]
Imperial gallon (UK) [igl]
Million USA gallon [mgl]
Cubic foot [cf]
Barrel (USA) [bal]
Imperial barrel (UK) [ib]
Oil barrel [ob] 
Time settings per day [/d]
per hour [/h]
per minute [/m]
and per second [/s] 
Data logger 1800 measurements
Interface USB (for online measurement and reading of the internal memory)
Protection IP 52
Power supply 3 x AA NiMH rechargeable battery / 2100 mAh (at full charge 12h running time)
100 … 240 V AC 50/60 Hz
Dimensions 214 x 104 x 40 mm / 8.4 x 4.1 x 1.5″
Weight 450 g / 15 oz
Sensor (only PCE-TDS 100 HS) Nominal width  DN 15 … 100, 20 … 108 mm / approx. 3/4 … 4″
Nominal width  DN 50 … 700, 57 … 720 mm / approx. 2 … 28″
Temperature of liquid -30 … 160 °C / -22 … 320 °F
Dimensions 50 x 45 x 45 mm / 1.9 x 1.7 x 1.7″
Weight 75 g / 2.6oz

 

To Shop Other Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA Products.

To Download Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA Datasheet.

 

Brand

PCE Instruments

PCE is a well know German-based Test Equipment manufacturer that focuses on the development, manufacture, and sales of test and measurement instruments, laboratory test equipment, control technology, and weighing equipment for commercial and industrial customers. PCE Instruments specializes in high-quality products in the field of preventive maintenance but provides a much wider product range in order to meet all customer requirements.

Reviews

There are no reviews yet.

Be the first to review “Ultrasonic Flow Meter Kit PCE-TDS 100HSH-ICA”

Your email address will not be published. Required fields are marked *